INTRA HYDROPURE
Guaranteed clean drinking water.
AUTHORISED USES
1. Biofilm disinfection of water distribution systems (curative):
- Used in the industrial area (PT02).
- Used in areas for processing of food and drinks, including pipeline systems in large scale catering kitchens, canteens, slaughterhouses and butcheries (PT04).
- Used in the veterinary areas (PT04).
- Used in greenhouses (PT02).
(drinking water systems for animals (not in use), water installations, water pipelines, irrigation systems, spray installations and drip systems)
Single application - Room temperature – Indoor.
Directions for use
Fill the water system with a 5% product solution (to 5 liter product add tap water up to 100 liter). Use a contact time of at least 10 hours. Ventilate the water system well during disinfection, to avoid a pressure build-up. Afterwards rinse with water of drinking water quality so the detached dirt is removed.
Contact with copper may decrease efficacy, therefore, efficacy should be validated when the product is used in copper tubing without the exceedance of the application rate.
Use-specific risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (e.g. rubber gloves). Wear a protective coverall (at least type 6, EN 13034) which is impermeable for the biocidal product (chemical resistant material). The use of eye protection during handling of the product is mandatory. Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory. Wash hands after use.
2. Drinking water for chicken:
- Disinfection of drinking water to maintain water quality in the water distribution system of poultry (PT05).
Single application - Temperature of the water in the distribution system: 20-30 ⁰C – Indoor.
Directions for use
Continuously dose the product to the animal drinking water in a concentration of 0.025% product. Dose the product directly to the drinking water, or prepare e.g. a solution of 2.5% (to 250 ml product add tap water up to 10 liter) and dose this diluted product as 1% to the drinking water using a dosing device. Use in clean drinking water systems. Use for water in pipelines only (not for water reservoirs).
Do not use the product in combination with oral vaccination. Stop product treatment at least 24 hours before dosing of oral vaccination, until 24 hours after.
For each type of animal drinking water system regular monitoring of the microbial quality of the drinking water is recommended in order to achieve effective use.
Use-specific risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (e.g. rubber gloves). Wear a protective coverall (at least type 6, EN 13034) which is impermeable for the biocidal product (chemical resistant material). The use of eye protection during handling of the product is mandatory. Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory. Wash hands after use.
3. Surface disinfection of water distribution systems:
- In pipeline systems in large scale catering kitchens, canteens, slaughterhouses and butcheries (PT04).
- Used in the veterinary areas (drinking water systems for animals (not in use) (PT04)
Single application - Room temperature – Indoor.
Directions for use
Fill the system with a 2% product solution for control of bacteria and yeasts, or 5% for control of fungi (to 2 or 5 liter product add tap water up to 100 liter). Use a contact time of at least 10 hours at 20°C. Ventilate the water system well during disinfection, to avoid a pressure build-up. Afterwards rinse with water of drinking water quality so the detached dirt is removed.
Use-specific risk mitigation measures
Wear protective chemical resistant gloves during product handling phase (e.g. rubber gloves). Wear a protective coverall (at least type 6, EN 13034) which is impermeable for the biocidal product (chemical resistant material). The use of eye protection during handling of the product is mandatory. Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory. Wash hands after use.
4. Disinfection of surfaces in animal housing:
- Non-porous hard surfaces in animal housing without precleaning (PT03)
Single application – Indoor.
Directions for use
Spray a 15% solution by coarse spraying with low or medium pressure (to 1.5 liter product add tap water up to 10 liter). Apply 0.1 L of the diluted product per 1 m2 of the treated surface. Use a contact time of at least 30 minutes. Use enough product to keep the surface wet for the recommended contact time. Rinse treated surfaces with drinking water after application.
Use-specific risk mitigation measures
Remove all food, feed and drinks prior to treatment. Wear protective chemical resistant gloves during product handling phase (e.g. rubber gloves) and wash hands afterwards. Wear a protective coverall (at least type 3, EN 14605) which is impermeable for the biocidal product (chemical resistant material). The use of eye protection during handling of the product is mandatory. Use of respiratory protective equipment (RPE) providing a protection factor of 20 is mandatory. At least a powered air purifying respirator with helmet/hood/mask (TH1/TM1), or a half/full mask with combination filter gas/P2 is required (ABEK) when preparing the solution for use or when spraying. Unprotected persons and animals should be kept away from treated animal housing during spraying. The area can be entered after the 30 min disinfection period has passed and the surfaces have been rinsed with water. For re-entry, the undercut of AECinhalation of 1.25 mg/m3 shall be ensured with technical and organisational measures (e.g. sensor, defined ventilation period).
Use restrictions
When possible dose from its original packaging.
Do not use the product in combination with other cleaning- or disinfection agents.
Do not use in concentrated form.
OTHER INFORMATION
Name and address of authorisation holder
Intracare BV, Voltaweg 4, 5466 AZ, Veghel, The Netherlands.
Authorisation number
IE/BPA 70684-004
Active substance
Hydrogen Peroxide (CAS: 7722-84-1; EC: 231-765-0), 49.4%.
Category of users
Professional.
Conditions of storage
Store in original container. Keep container tightly closed.
Pack size and material
1 liter (HDPE).
5 liter (HDPE).
10 liter (HDPE).
20 liter (HDPE).
200 liter (HDPE).
950 liter (HDPE).
Type of formulation
Soluble concentrate (SL).
First aid instructions
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112/ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor.
IF SWALLOWED: Immediately rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. Call 112/ambulance for medical assistance. Information to Healthcare personnel/doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Directions for safe disposal and if applicable, prohibition on reuse of packaging
Dispose of contents / container in accordance with local regulation.
SAFETY INFORMATION
Danger
Hazard statements
May intensify fire; oxidiser.
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause respiratory irritation.
Harmful to aquatic life with long lasting effects.
Precautionary statements
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Keep away from clothing and other combustible materials.
Keep only in original packaging.
Do not breathe mist/vapours/spray.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
Wear protective gloves / protective clothing / eye protection / face protection.
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. Immediately call a poison center/doctor.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
Wash contaminated clothing before reuse.
In case of fire: Use water to extinguish.
Absorb spillage to prevent material damage.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Dispose of contents according to local/national regulation.
ADDITIONAL USE RECOMMENDATIONS
· In case of severe biofilm / pathogenic bacteria pollution, water analysis is recommended.
